Home About ABRI Who We Are Contact News Aetherometry Intro Pix Gallery Demos


The New Aetherometric Technologies


TABLE OF CONTENTS:

INTRODUCTION TO THE CORREA TECHNOLOGIES

THE ABRI TECHNOLOGIES & RESEARCH PROJECTS

I. ALTERNATIVE ENERGY & MOTOR SYSTEMS

1 ­ Pulsed Plasma Power (aPAGD/IVAD)

2 ­ Power from Nuclear Fusion: Aetherometric Fusion Reactor (AFR)

3 ­ Solar and Atmospheric Energy Conversion Systems: HYBORAC Converter

4 ­ The Aether Motor/Converter (AMC)

5 ­ The Passive Ground Charger (PGC)

6 ­ The Passive Electric Water Turbine (PEWT)

II. ALTERNATIVE WATER SYSTEMS

1­ The Passive HYBORAC Distiller/Desalinator (PDD)

III. LIFT SYSTEMS

1 - The Aetherometric Weight-Neutralizer (AWN)

2 - The Aetherometric Anti-Gravitator (AAG)

IV. BIOPHYSICAL AND BIOCHEMICAL TECHNOLOGIES

1 - The Biological Aether Field and Contact Meter (BAM)

2 - The Biochemical Linear-Log p[e-] Meter (PE Meter)

3 - The Active Bio-Aether Irradiator (ABAI)

4 - The Radiant Energy Red Blood Cell Response (RER) Kit

5 - The Aetherometric Cancer Project: The Leukemia Early-Detection (LED) Kit

V. ANALYTICAL INSTRUMENTATION

1 - Advanced Aetherometric Data Acquisition & Analysis System: the Aetheroscope

 

TOP


INTRODUCTION TO THE CORREA TECHNOLOGIES

Aetherometry, or the science of Massfree Energy, is the beginning of an interdisciplinary scientific and technological breakthrough. It has already laid the foundations for a new energy-based understanding of physical and biophysical systems, and created an encompassing experimental platform permitting multiple research forays into a variety of related disciplines. This constitutes a productive analytical and experimental mix that is rich in practical applications. The technological embodiments of Aetherometry are therefore quite varied. They encompass new Power-Generation or Alternative Energy Systems, Lift and Transportation systems, Biophysical Meters and Biological Radiation Detectors, Clinical Products, and Analytical Instrumentation.

 

TOP


THE ABRI TECHNOLOGIES

I. ALTERNATIVE ENERGY SYSTEMS OR POWER TECHNOLOGIES

All the Alternative Energy Systems developed by the Correas - first at Labofex and then at ABRI (Aurora Biophysics Research Institute) - share a common philosophy that is best described as the conjugation of two simple strategies:

(1) independence from the energy grid and the utility infrastructures; and

(2) autonomy of power generation.

Sometimes, as in the HYBORAC technology below, even conversion to electricity is not a necessary step (eg for a compressor or a heat pump).

There are four major technology-development efforts detailed below:

  1. Tapping 'Vacuum-energy' in pulsed plasma discharges. This was a technology first developped at the now defunct Labofex Co. dedicated to pure and applied research in plasma physics. Current development has been mostly subsidiary to the Aether/Orgone Motor/Converter System technology (#4 below).

  2. Tapping nuclear fusion energy in low-temperature reactions. Currently a focus of the theoretical and engineering design efforts at ABRI.

  3. The HYBORAC technology which taps and directly integrates solar, atmospheric and geothermal sources. Due to its simplicity, scaleability and advanced stage of development, this is the current ABRI priority in engineering and technological development.

  4. The Aether/Orgone Motor/Converter. Currently the subject of further 3rd generation development at the ABRI, with patents issued in 2006 and 2007. This is the power-generation technology of the future.

 

TOP


Energy Technology 1 - Pulsed Plasma Power (Tapping 'vacuum'-energy: aPAGD/IVAD)

Dr. Paulo Correa and Alexandra Correa made their first experimental breakthrough in 1986, when they discovered and isolated a self-triggered pulsed plasma discharge in the abnormal-glow discharge region (autogenous Pulsed Abnormal Glow Discharge, or aPAGD). The basic circuitry consists of a DC input section, a plasma reactor, and an output pulsed DC section. When properly tuned, the electrodynamically-sustained resonant state of plasma pulsation outputs more electric power than is input. Output pulses have reached >30 kW, with mean power inputs of 50 to 100W and mean outputs of 200 to 600W. The energy in excess of breakeven is the result of a resonance of the accelerated electron plasma with the local Massfree Energy Plenum, or so-called "vacuum state". This state of resonance permits the tapping of a New Source of Energy, in fact, a source of Massfree Electric Energy, first discovered by the Correas - who have identified its spectrum.

The Correas have developed Inverter and Converter applications for this plasma technology. Together with the PAGD plasma reactor, these individual applications have been the subject of 7 separate patents  granted in the US, Canada, England and Israel.

The Converter system encompasses a secondary-battery-based environment for the extraction of plasma energy in excess of the input energy required to drive the converter.

The Inverter solutions allow the operation of AC devices (motors, relays, transformers, etc) from the pulsed DC output of the aPAGD plasma device, with a minimum of circuitry and losses. Inverter-flywheel systems were also developed.

High Power Reactors employing both the aPAGD regime and mechanically-interrupted Vacuum Arc Discharges (IVADs) have been the subject of continued improvement.

From 1996 to 2003, the Correas made further substantial progress in the development of High Power Reactors, Inverter and Converter systems. These innovations have been kept as commercial secrets. Converter-competitive inverter solutions were also developed before Labofex closed down, including a closed-loop, inverter-based, inertially damped motor-generator system.

The entire aPAGD technology has been ready for commercialization for well over ten years. Yet, despite the efforts of all at ABRI - and in particular the personal efforts of Dr. R. Silva, Dr. H. Aspden, Dr. E. Mallove, Mr. U. Soudak, Prof. A. Axelrad, Prof. H. Branover and still others, no sponsor has come forth to help this technology come to fruition. Ecologist movements have been silent on the technology. Politicians, governments and their granting agencies have refused to become involved unless total control is given to them.

Yet, our Research Institute ploughed ahead. Working bench prototypes of the Converter System have been regularly employed in demonstrations given to interested parties who present the appropriate credentials. Full technical details of this project are described in the various patents, as well as in articles, papers and monographs accessible on-line or in various Journal venues (see aetherometry.com). Some of these models are demonstrated in the Akronos DVD "From Pulsed Plasma Power to the Aether Motor". For a technical and legal evaluation of this technology, the reader is referred to Dr. Harold Aspden's Opinion on the Correa Invention. For a scientific evaluation, the reader is referred to to Dr. Aspden's "Power from Space: the Correa Invention" and to Prof. Emeritus Dr. William Tiller's essay "Some Reflections on Gas Discharges and PAGD Pulses".

References

Pictures:
Alexandra Correa with PAGD diode
PAGD triode
See also our Picture Gallery

 

TOP


Energy Technology 2 - Power from Nuclear Fusion in Table-Top Reactors (electrodynamically-controlled 'Cold Fusion')

The design of a small, self-contained, low-cost and environmentally-clean table-top Nuclear Fusion Reactor is one of the major outgrowths of AToS (Aetherometric Theory of Synchronicity) - the result of a synthesis between the experimental work of the Correas in plasma and nuclear physics with their analytical work in decoding the subquantum electronic and nuclear structures of the Atom (see "The Correa Solution to the Cold Fusion Enigma").

Current focus is the design of the Aetherometric Fusion Reactor (AFR), an electrodynamically-controlled reactor that employs special combinations of materials to layer both the reagents and the reactants (or byproducts) so as to directly generate both sensible heat and electricity without the need for any moving parts, while partially regenerating the fuel.

In essence, hydrogen and deuterium are fed to the reactor under conditions designed to promote two fundamental types of controlled nuclear reactions identified by AToS. These two combined reactions release both short (intense burst) and long-term (low level) sensible heat. Though serendipitously known by existing research in nuclear physics - as well as in the field of so-called "cold fusion" - the exact reactions have neither been understood properly by the scientific establishment, nor mastered under conditions that electrodynamically permit their controlled utilization.

The byproducts of these reactions are shunted to produce helium - which is trapped in a self-contained heat exchange circuit designed to export the heat and return the coolant to the reactor - and produce hydrogen. A portion of the deuterium fuel is also recycled throughout the process. The reactor is designed so that residual charge from the reaction is separated and is fed, in turn, to a vacuum-shield envelope, where it is employed to directly generate electricity by means of an electrodynamically-controlled pulsed plasma discharge operating with auto-electronic emission in the PAGD regime and employing patented converter-system techniques. Other couplings have also been studied.

The aetherometric theory of nuclear fusion reactions and of the nuclear structure of the Atom, as well as the entirety of the work focused on the development of the AFR, have been kept strictly as a scientific and commercial secret. Because the AFR employs electrodynamic plasma control to directly extract the energy of the fusion reactions, development of this technology is naturally coupled to the Pulsed Plasma Power technology. The natural power output targets for the development of this technology are expected to lie in the megawatt range. Without a major sponsor, the Research Institute will not be able to pursue this project beyond the drafting table. However, in the past two years significant progress has been made in perfecting the coupling of the reaction cells.

 

TOP


Energy Technology 3 - Solar, Atmospheric and 'Geothermal' Energy Conversion Systems (thermomechanical and thermoelectric, passive HYBORAC energy converter)

The HYBORAC technology is currently the Institute's priority in technological and engineering development. Due to its simplicity, zero fuel cost, reliability, scaleability, large power outputs and modularity, this technology can be used for mechanical work, to drive compressors or heat-pumps, to generate electricity os supply heat.

The technology grew out of studies on long-term latent and sensible heats generated inside Faraday-cage-like enclosures. The technology employs a new method to tap the latent heat of special Faraday cage-like collectors, and convert it into sensible heat. All local sources of latent and sensible heats are directly integrated by the design, so that the device passively captures solar and atmospheric radiation, as well as 'geothermal' energy (sensible or latent). The device's output of sensible heat is used to passively drive a thermomechanical system, which can be directly coupled to a compressor, heat-pump or electric generator.

The invention is able to supply heat, mechanical work and electricity around the clock, using local Solar, Atmospheric and Geoterrestrial sources of Massfree Energy.

The invention of the technology can be followed in the recently released DVD "Free Power Around-the-Clock". A dramatic improvement of the HYBORAC Converter is discussed at length in the extensive monograph of the Correas, "Around-the-clock free power from improved HYBORACs driving low delta-T Gamma Stirling engines, Part IV". The reader is also referred to a report published in Infinite Energy and co-authored with the late Dr. Eugene Mallove, as well as to Dr. Mallove's editorial "New Solar Power".

By the second year of development, 'Proof-of-Concept' bench prototypes having diminutive volumes of only 8x8x8 cubic inches were already capable of generating 4 watts of sensible heat during daytime and 2 watts during nighttime.

Current development of sophisticated 3rd generation prototypes targets outputs greater than these by more than three orders of magnitude. After a successful first run production of the 1st stage of an HYBORAC slated for an electric output of 1.5 kW, the research effort concentrated in 2006 on the experimental heat-forming fabrication of the 2nd stage. The failure of these efforts led to a redesign of the HYBORAC 2nd stage and current employment of a casting method.

This project has been treated as a strict commercial secret by the Institute. It is our view that it has a shorter time to market than all the other aetherometric projects in Alternative Energy Systems.

References

Pictures:
HYBORAC/Stirling 1st generation
HYBORAC/Stirling 2nd generation
3-D VIEW of HYBORAC/Stirling 3rd generation
See also our Picture Gallery

 

TOP


Energy Technology 4 - The Aether Motor/Converter (Aether Power)

The first of the original technologies in alternative power generation developed by the Correas at ABRI within the framework of AToS, was a totally self-sufficient Aether Motor/Converter (AMC). Its development drew upon the lost and misunderstood investigations of Nikola Tesla and upon Wilhelm Reich's 'Orgone Motor'. The AMC operates by extracting Massfree Energy from Faraday cage-like enclosures or resonant cavities, living beings, the ground, vacua (Reich's Vacor tube principle), and atmospheric antennas. The Aether Motor/Converter can also be coupled to the PAGD technology or made to employ other plasma discharge regimes. Working lab prototypes of the Motor, with or without plasma tubes, exist at ABRI, and some of these models are demonstrated in the DVD "From Pulsed Plasma Power to the Aether Motor".

Until mid-2006 the technology was kept a well-guarded secret. After the first patent was issued in May 2006, Akronos Publishing made available the Correas' first book on the Aether Motor/Converter, which details the Correas' development of Tesla's primitive Aether Motor, and Reich's 'aided', 2-phase Orgone Motor. They also divulge the Factor Y (or Function Y) that Reich never revealed, as well as the history and the testing characteristics of Spinner Motors, in particular Western Electric Spinners KS-8624, KS-9154 and KS-9303. A second patent for the Correa Aether Motor issued in April 2007. Second generation AMC's output, per module, in the range of 1 to 150 watts. The Correas have developed transmitter-independent third generation AMC systems capable of driving motors, lasers or induction oils. These developments remain commercial secrets.

Further development of this technology will require a massive effort to redesign electronic components. Despite intense efforts by the late Dr. Eugene Mallove, no sponsor for this technology has come forward. The technology and the science behind it have been the object of severe distortion and appropriation by various mouthpieces of the New Energy Movement and associates, and totally suppressed by Reichians and their organizations (M. Higgins, J. DeMeo, PORE, ACO, etc), as well as 'green groups' (Greenpeace, etc). The reader should realize how this invention functions as a barometer of our epoch - where petty fears (such as those that have been openly expressed regarding Aetherometry becoming a threat to Official Orgonomy, etc) rule not just what becomes known but also which technologies are or are not developed, all in the name of 'Green' and 'Salvation of the Planet' (read 'Humanity'), etc.

In accordance with the theoretical and experimental frameworks of Aetherometry, tapping ambient Aether Energy and efficiently transforming it to extract electrical power will be the ultimate way of gaining access to truly infinite energy. Energy is neither created nor destroyed. Aetherometry contends that its existence is infinite, and so can be its utilization. Successful commercialization of this heretofore unexploited energy source therefore stands to open the doors to the last revolution in power technologies, a revolution that will drastically change all existing structures of our present society.

Perhaps that is the reason no media or power-that-be wants to hear about this technology. Why, at best, it is relegated to the mystical margins of society.

References

Pictures:
Aether Motor 1
Aether Motor 2
See also our Picture Gallery

 

TOP


Energy Technology 5 - The Passive Ground Charger (Earth Electrical Power)

Another ABRI technology developed directly from AToS is the Passive Ground Charger (PGC), which captures ambipolar emissions from geomagnetic currents (including those induced by storm conditions) on the terrestrial crust, as well as from the motion of bodies of water or man-made ambipolar sources. The device has a very small cell structure and is entirely passive, i.e., is independent of any internal energy source. It has been demonstrated by the Correas to be capable of recharging capacitors or small AA batteries overnight. Dr. E. Mallove described one such demonstration in his Second Open Letter of Support.

The invention has been kept as a commercial secret. Since it requires zero maintenance, it is ideally suited for very light-weight portable applications, the outdoor enthusiast and outdoor lighting markets. It is not yet known whether the energy density of such a device can be made cost effective and competitive.

 

TOP


Energy Technology 6 - The Passive Electric Water Turbine

In its infancy still, the Passive Electric Water Turbine (PEWT) is the outcome of the integration of three different entirely passive approaches to the extraction of energy from moving water: (1) the old hydroelectric principle of employing moving water to mechanically generate electricity, is here coupled to entirely new passive electric methods to extract, without any moving parts, (2) the currents of moving monopolar charges in water and (3) the currents of ambipolar charges being emitted and resonantly transmitted through water.

Proof-of-principle of the new extraction methods has been demonstrated. Current work seeks to integrate all three methods in an easily portable apparatus that can be placed in rivers, oceans and lakes. This technology has also been kept as a commercial secret.

 

TOP


II. ALTERNATIVE WATER SYSTEMS

Water Technology 1 - The Passive HYBORAC Distiller/Desalinator

Currently in its initial stages of final development, the Passive HYBORAC Distiller/Desalinator (PDD) is the result of a threefold synthesis of the third-generation HYBORACs with the existing passive solar energy technologies and passive water distiller and desalinator designs. Preliminary single-stage models have led to a streamlined second-generation, two-stage PDD currently under construction.

This technology not only represents an autonomous, clean alternative to quality-uncertain utility-supplied water, but is above all an application ideally suited for dry environments lacking rain or access to sweet water, but with plenty of salt water available. The device is designed to work with no consumption of electrical power as both a distiller and a desalinator, to be easily sized, assembled and disassembled, and it is built with integral parts and is fully portable.

References

 

TOP


III. LIFT SYSTEMS

Lift systems based upon AToS employ active weight cancellation by means of the kinetoregenerative phenomenon and the aetherometric techniques of engineering ambipolar radiation to generate anti-gravitons. These technologies should enable the development of systems of Lift, Excavation, Transportation and Flight which utilize aetherometric engineering of Massfree Energy in (anti-)gravitational form. The technologies are still at an experimental stage, with proof-of-concept having been achieved for 100% weight-cancellation employing both ambipolar beams and the monopolar effect, and lift forces up to more than 4x the magnitude of the weight force with the monopolar effect. Comprehensive discussions of the technologies have now been made public.

 

TOP


Lift Technology 1 - The Aetherometric Weight-Neutralizer (AWN)

The Aetherometric Weight-Neutralizer (AWN) is a tunable, target-directed device that can be used for short-range weight-cancellation of an object of known chemical composition. With a power consumption of a few watts, first-generation devices can induce weight-loss of objects weighing in the 100 mg range, by employing a homogenous ambipolar energy beam. Demonstrations of cancellation of 70% and 95% of weight were observed and described by Dr. E. Mallove, and are described in the first Correa patent for the Aether Motor.

This technology has been kept as a commercial secret. Current work at ABRI aims at taking this technology beyond the weight-neutralization stage by continued research into the physics of energy superimposition which permits the conversion of ambipolar radiation into anti-graviton energy.

References

 

TOP


Lift Technology 2 - The Aetherometric Anti-Gravitator (AAG)

The Aetherometric Anti-Gravitator (AAG) represents the development of the kinetoregenerative phenomenon beyond the dynamic balance characteristic of weight-neutralization that is observed in electrostatic and electroscope-type interactions. The demonstrable electrodynamic effect is strictly monopolar, independent of ionization or ion-wind generation, and can induce negative gravity sustained against the gravitational frame of the local Aether lattice.

Only experimental, proof-of-concept bench apparatuses currently exist. Research is presently focused on reproducing the 'monopolar lift effect' in various vacua.

References

 

TOP


IV. BIOPHYSICAL AND BIOCHEMICAL TECHNOLOGIES

Perhaps the most exciting applications of AToS are those that permit the development of biophysical and biological technologies having potential for clinical applications, either as diagnostic or as therapeutic tools.

Work on Biophysics at the ABRI has focused on understanding the novel bioenergetics of primary massfree energy in its two forms - ambipolar radiation (massfree electric energy) and latent heat - and their relationship to normal and altered states of cellular metabolism. Inevitably, this research has led to a focus on functional and dynamic aspects of normal physiology and disease, in particular, on the problem of cancer. These biotechnologies are intended to serve the interests of a clinical medicine committed to understand the involvement of biophysical factors in disease, and to use this new understanding as a potential for prophylaxis and new therapeutic techniques.

 

TOP


Biotechnology 1 - The Biological Aether Field and Contact Meter

This original Biological Field and Contact Meter (BAM) is tuned to passively generate a calibrated electrical potential in response to the two types of Massfree Energy or Aether fields that are immanent to complex organisms (such as human beings): nonelectric latent heat and electric ambipolar energy. The BAM generates a voltage differential and time-varying waveform based upon discrimination between the two biological Aether field energy effects, and the proximity (up to >4 meters of distance) and contact of a living body. Proximity ambipolar (so-called Kirlian aura) vs proximity latent heat fields are readily differentiated, and so are contact ambipolar and monopolar fields. Dr. E. Mallove has provided a summary description of his observations with the BAM.

The BAM employs no power supply. Various sensors have been developed for large-area and point-source applications. Sensors that include the electrostatic field of monopolar charges are also available. Measurement of field velocities is direct. (Note: this is not a capacitance meter or an electromagnetic meter like so many false, so-called biophysical field meters currently in the market.)

The BAM can be employed for research in massfree biofields, with potential applications in medical diagnostics, utilization by practitioners of alternative medicine, and detection of moving or stationary biofields (with applications to security and rescue or emergency responses). The greatest potential of this invention is its subsequent development as a method for the passive measurement and imaging of massfree biofields on the human body.

References

 

TOP


Biotechnology 2 - The Biochemical Linear-Log p[e-] Meter

This technology based on measuring the linear log of the electron concentration (PE Meter) is the result of the Correas' nanometric investigation of the acid/base and redox chemistries of water and hydrogen, conducted with aetherometric methods. Based upon the extended aetherometric treatment of the Nernst equation, the PE Meter directly measures the electrokinetic energy and velocity of chemical reactions, whether heterolytic or homolytic, without the end-scale skewing characteristic of all pH Meters, or of pH and pOH scales. This technology will revolutionize the methods of chemical and biochemical analysis, as it employs a single instrument to integrate and differentiate acid/base and redox contributions, while introducing the users to the basic foundations of analytical aetherochemistry. Current development focuses on designing the types of sensors required to integrate the measured parameters.


References:

The analytical and theoretical basis of this technology, including the master algorithm, is extensively presented in Correa, P & Correa, A (2004) "Nanometric functions of bioenergy", Akronos Publishing, University of Toronto Press, Concord, Canada, Chapter 6, "Aetherometric theory of the pH scale and the cycles of water and hydrogen formation and dissociation", pp. 194-224.

 

TOP


Biotechnology 3 - The Active Bio-Aether Irradiator

The Active Bio-Aether Irradiator (ABAI) is the outcome of the aetherometric research pertaining to Dr. Wilhelm Reich's "Orgone Accumulators" and the HYBORAC technology. It has led to the creation of a cabinet-type converter of controlled ambipolar radiation, that operates independently from solar radiation and serves as an accumulator of latent and sensible heats for therapeutic applications. The controlled exposure to ambipolar radiation is free from ozone production.

The biophysical effects of the device have been studied, but pre-clinical tests are now necessary. It is expected that irradiation with the Active Bio-Aether Irradiator may prove to be a better controlled, more intense and more efficient prophylactic tool for the treatment of diseases caused by biological depletion of Massfree Energy, than the use of passive accumulators of latent heat (so-called "Orgone Accumulators"). When properly developed, this may well become an alternative procedure to today's nuclear irradiation and chemotherapeutic treatments of cancer and leukemia.

References

 

TOP


Biotechnology 4 - Radiant Energy Red Blood Cell Response (RER) Kit

Recent work at the ABRI permitted development of a simple methodology to discriminate between biologically positive and negative effects of radiant energy (blackbody radiation, ionizing radiation, latent heat and ambipolar radiation) upon normal mature erythrocytes (Red Blood Cells) and the growth and development of erythrocyte precursors collected from peripheral blood. The method consists of a two-step procedure that discriminates between short-term and long-term responses, the latter involving clonal culture-assays as a function of selected partial pressures of oxygen. These assays will be standardized with select transformed cell lines as well as with test donor cells. A membrane-lability negative control is also used as a calibration marker.

The RER Kit technology aims to develop simple biological test-kits that can be employed to differentiate the nature and effect of radiative fields, permitting distinction between the effects caused by subspectra of the same radiant energy - such as HFOT and LFOT photons in the blackbody spectrum, or nonelectric and electric Massfree Energy or, still, the different subspectra of ambipolar radiation (OR vs DOR).

References

 

TOP


Biotechnology 5 - The Aetherometric Cancer Project: The Leukemia Early-Detection (LED) Kit

The current aetherometric model of non-inheritable neoplasia suggests that it is an acquired or functional disease whose universality resides in the selection of a multiplicity of pathways that converge upon a simple metabolic alteration - what A. Szent-Gyorgyi called an alpha state of metabolism. The Aetherometric model suggests that the 'selective advantage' is conferred by effective tissue, organ and system starvation of oxygen and Massfree Energy. The essential prediction is that before the onset of tumors or a 'true leukemia', the red cell compartment is adversely affected - either with a latent precursor-cell erythroleukemia, or with an overt anemia - and that consequently, in a sense, there is always an initial erythroleukemic disfunction prior to somatic cancer or to 'true leukemia'. In this model, the genetic changes that bring about the overt neoplastic disease constitute Lamarckian post-adaptive responses to the selecting conditions of oxygen-and-energy starvation experienced by the target tissue, beginning with the oxygen carriers, the Red Blood Cells (RBCs). The aetherometric model of cancer suggests that the decomposition of RBCs is what triggers the uncontrolled growth of White Blood Cells ('true leukemia') as an immune response directed against decomposing Red Blood Cells (auto-immune response).

Current work on this model focuses on the Chronic B-cell Leukemias, all of which present splenomegaly and hemolytic anemia. Chronic Lymphocytic Leukemia (CLL) is of particular interest because recent studies have indicated that half of these patients have overt hemolysis and severe auto-immune responses (where IgG is prominent) against Red Blood Cells. When the methodology of the RER Kit technology is used, the short-term response of erythroid cells from leukemic patients in the absence of any radiation appears to be analogous to the response of normal erythroid cells that are exposed to ionizing radiation or to membrane detergents. By correlating the RER Kit responses of erythroid cells from cancer and leukemic patients (CLL in particular) with the degree of hemolysis and the type and frequency of RBC-autoantibody expression, this project aims at developing a clinical kit - the Leukemia Early-Detection (LED) Kit - for the immediate, front-line diagnostic of leukemia. This may also potentially permit a better clinical staging of the disease.


References:

The new aetherometric paradigm of the biophysics and biochemistry of neoplasia owes much to O. Warburg's 'effect', W. Reich's model of 'essential erythroleukemia' and A. Szent-Gyorgyi's 'theory of a selectable metabolic switch'. For further background information, please refer to Correa, P & Correa, A (2004) Nanometric functions of bioenergy, Akronos Publishing, University of Toronto Press, Concord, Canada, Chapters 3 and 8. See also Child, JA et al (1998) "The Lymphoproliferative disorders", Chapman & Hall Medical, NY, NY, in particular pp. 225-240.

For current research, see the Correas' recent "Anemia, Polycythemia and Leukemia".

 

TOP


V. ANALYTICAL INSTRUMENTATION

1 - Advanced Aetherometric Data Acquisition & Analysis System: the Aetheroscope

The present stage of the Correas' development of aetherometric functionalism - and in particular, its novel analytic capabilities with respect to electrodynamic, thermodynamic, gravitodynamic and kinemassic interactions - together with previous experimentation in the design and programming of instrumentation for data acquisition and analysis, have made possible the invention of primary analytical modules that provide entirely new physical information variables. Established physics is either ignorant of most of these variables (eg the intrinsic wavefunction of charge, the length equivalent of temperature, etc) or considers their determination uncertain (eg the velocity of conduction electrons, the location of particles with known speed, etc). The Aetheroscope is a sophisticated aetherometric data acquisition and analysis system which will permit anyone to make these determinations in situ for all energy interactions.

The Aetheroscope permits data processing and sophisticated electrodynamic, thermodynamic, electromagnetic, kinemassic and gravitodynamic analysis, for engineering, physical and biological sciences applications. Data inputs from the BAM and PE Meter technologies (see above) can also be fed to the Aetheroscope for processing and analysis. The complete program is envisaged as being widely encompassing. It will provide essential routine analysis of complex physical parameters in virtually all domains of Physical Science, Earth Sciences, Life Sciences and Engineering by the much simpler but far more accurate determination methods provided by AToS.

The Aetheroscope modules have a very wide range of marketability and applicability. Aside from direct utility for the analysis of electromagnetic, electrodynamic, thermodynamic, gravitodynamic and kinemassic machinery, the instrument will prove to be essential for analysis and set-up of control routines in virtually all physical and engineering systems.


References:

The Aetheroscope technology has been kept as a commercial secret, even though a patent application for existing modules has been drafted but not submitted.

 

TOP


 

What Is...
Leukemia Aetherometry Bioenergy